DIEL ME 200 E Manual De Instalacion Y Uso página 27

ME 200 E ENG
The following values are then proposed, modifiable with the keys , to
be confirmed with the key .
P: PRE-ALARM, default 140
A: ALARM (CONTROL UNIT
INTERVENTION), default 160
FnA: FAN COOLING BAR "A"
(not required for configuration 0)
L: FANS SHUTDOWN, default 90
H: FANS INTERVENTION, default 100
FnB: FAN COOLING BAR "B"
(not required for configuration 0)
L: FANS SHUTDOWN, default 90
H: FANS INTERVENTION, default 100
C: PROTECTION OF FAN BEARINGS,
default 1, C=0 not active, C=1 fan
Intervention 1 time for day 5 min, C=2 fan
intervention 1 time for week 5 min
At the end of the programming cycle, the control unit performs the test on all
the light sectors and positions itself in the main menu displaying the maximum
measured temperature and the relative channel.
For safety reasons, the time required for programming is in any case checked.
Over one minute from the start of the programming phase, the same is
interrupted and not saved (therefore the previously set parameters remain
active) after which it returns to automatic display mode.
- 27 -