Publicidad
Idiomas disponibles
Idiomas disponibles
Brake lever adjustment
AR0
Brake adjustment
AR0
INSTRUCTIONS
It is possible to adjust the position
of the brake lever, if necessary, by
unscrewing the screw (A). Once the
position has been adjusted, tighten the
screw (A).
INSTRUCTIONS
If the brake is too tight or too loose,
adjust it by loosening or tightening the
screw (1).
If the brake lever is too soft or too hard
even after following the instructions in
the first step, it may be necessary to
repeat the operation until the optimal
setting has been reached.
18
Publicidad
