Getting Started - Swann SWIFI-4KFLOCAM-US Guia De Inicio Rapido

Wi-Fi Coverage Availability
• Before you permanently mount the floodlight camera unit, it is important that you confirm the
availability of Wi-Fi as well as the signal strength at the desired installation location.
• Note that Wi-Fi quality can vary significantly at different locations around the home due to
environmental factors such as home construction type and wireless interference from other
electronic devices.
Checking your Wi-Fi network coverage
Connect your phone to the 2.4GHz Wi-Fi network band of your internet/broadband router.
1
Note: The camera can connect to a 2.4GHz network only.
Bring your phone to the location where you want to install the floodlight camera unit. If you have
2
Wi-Fi connection on your phone, the camera will also likely be able to obtain Wi-Fi connection.
Check the Wi-Fi signal strength status icon at the top of your phone screen. We recommend a
minimum of 1 bar showing as shown below. Further testing should be performed if the Wi-Fi
signal strength is only a single bar.
X
0
No connection
To avoid any potential Wi-Fi connection issues later, try playing a video through a media streaming
3
EN
service app, for example, YouTube
4

GETTING STARTED

!
1 2
Poor Fair Good
or Netflix
™
Wi-Fi signal strength icon
3 4
Excellent
, on your phone. If possible, temporarily pause all
™