Linking; Control Mode - DJI Video Transmitter Guía De Usuario

Idiomas disponibles

Linking

The video transmitter must be linked to the receiver device before use. The video transmission

system of the video transmitter offers Control mode and Broadcast mode, which use different

linking methods. Refer to the following section for instructions and linking status indicator

descriptions.

1. Power on the video transmitter. Press and hold the menu dial on the video transmitter until the

linking status indicator blinks red and green alternately, indicating that it is ready to link.

2. Power on the remote monitor. Tap

Select Control Mode, set the monitor as Control Monitor A or Control Monitor B, and tap Link

to Control Monitor A/B to enter linking status.

3. When linking is complete, the linking status indicator turns solid green and the remote monitor

will have a connected status.

Broadcast Mode

1. Power on the video transmitter. Press the menu dial on the video transmitter, turn the dial to

select Broadcast in the menu, enable Broadcast mode, and select channel.

2. Power on the remote monitor. Tap

Select Broadcast Mode and the monitor will automatically search for nearby devices with

Broadcast mode enabled. Tap a device to monitor and the live view from the corresponding

device will display on the remote monitor. Tap the camera number on the right side of the

screen to refresh the live view or switch between the monitored devices.

Refer to the Broadcast Mode Settings section for more information about the usage.

Linking Status Indicator

Solid red

Blinks red and green alternately

Solid green

Blinks red

to enter System Menu and then Connection Settings.

Description

Device started, not connected.

Linking.

Successfully linked in Control mode. Wireless video

transmission is normal.

Broadcast mode enabled.

Device malfunction. Contact DJI Support.

Tabla de Contenido