Publicidad
Setup
Step 1
Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown
in the figure below.
Power Port
Turn on the camera and let it power up. The camera will completely rotate side-to-side
and tilt up-and-down once.
LED Indicator Status
LED Indicator
1
Power Outlet
Power Cable
Solid Red: Camera is starting up.
Slow-Flashing Red: Wi-Fi connection has failed.
Fast-Flashing Red: Device exception (e.g. MicroSD
card error).
Solid Blue: Video is being viewed or played back
in EZVIZ App.
Fast-Flashing Blue: Camera is ready for the
Wi-Fi connection
Slow-Flashing : Camera is running properly.
Publicidad
