N8WERK 05050 Manual De Instrucciones página 17

CAUTION: hot surfaces!
The device and accessories will become very hot during use.
Do not come into contact with heated parts while or after
using the device! Only ever touch the handle and the control
panel while the device is in operation or immediately after it
has been switched off. Wait until the device has cooled down
fully before it is transported, cleaned or stored away. Use
oven gloves when handling the hot accessories.
■ Do not pour any liquids (e.g. oil or water) directly into the device or
the drawer or place a liquid-filled vessel into the device. It works
exclusively with hot air.
■ The device must always be disconnected from the mains power
when it is left unattended and before transporting or cleaning the
device.
■ Do not make any modifications to the device. Also do not replace
the connecting cable yourself. If the device, the connecting ca-
ble or the accessories of the device are damaged, they must be
replaced by the manufacturer, customer service department or a
specialist workshop in order to avoid any hazards.
■ The device is not designed to be operated with an external timer or
a separate remote control system.
■ Follow the instructions in the "Cleaning and Storage" chapter!
DANGER – Danger of Electric
Shock
■ Use and store the device only in closed
rooms.
■ Do not use and store the device in rooms
with high humidity.
■ Never touch the device and the con-
necting cable with wet hands when the
device is connected to the mains power.
■ If the device falls into water while it
is connected to the mains power, pull
the mains plug out of the plug socket
immediately. Only after this should you
retrieve the device from the water.
■ Do not use the main unit if it has mal-
functioned, has been dropped or fallen
into water to avoid any hazards. Have it
checked in a specialist workshop before
using it again.
WARNING – Danger of Fire
■ Do not operate the device in the vicinity
of combustible substances. Do not place
any combustible materials (e.g. card-
board, paper, plastic) on or in the device.
■ Do not cover the device during operation
and keep the ventilation openings clear
in order to prevent it from catching fire.
EN
15