Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Voltage
Battery type
Lumens
Articulating head LED
Articulating head spot light LED
Spot light LED
LUX at two meters
Articulating head LED
Articulating head spot light LED
Spot light LED
Run Time When Fully Charged
Articulating head LED
Articulating head spot light LED
Spot light LED
Charging temperature range
Operating temperature range
Storage temperature range
OPERATION
CAUTION: Do not stare into the LEDs. Serious eye
injury could result.
Multi Function Button (Fig. A)
The LED lights
6
,
7
,
9
1. Press the multi function button
articulating head LED
2. Press the multi function button
activate the articulating head spot light LED
3. Press the multi function button
LEDs OFF.
4. Press and hold the multi function button
activate the spot light LED
5. Press the multi function button
LEDs OFF.
Articulating Head (Fig. A, D, E)
The articulating head
5
pivots in ten fixed positions from
0°–180° and then swivels and rotates in position from 0°–180°.
1. To move the articulating head
articulating head
5
upwards away from the housing
2. To adjust the beam of the articulating head LED
swivel and rotate the articulating head
into position.
V
DC
lm
lm
lm
lx
lx
lx
hour
hour
hour
40 °F – 104 °F
4 °C – 40 °C
14 °F – 140 °F
‑10 °C – 60 °C
14 °F – 140 °F
‑10 °C – 60 °C
have one brightness setting.
1
once to activate the
6
.
1
a second time to
7
1
a third time to turn the
1
once to
9
.
1
again to turn the
5
pivot the end of the
5
by twisting it
Magnets (Fig. A)
CAUTION: When the LED light hangs by the magnet,
CMMT25165
do not shake the LED light or the object from which
5
it hangs. Do not hang the work LED light overhead
18650
or from anything that is not secure. Personal injury or
Li‑Ion
property damage may occur.
CAUTION: Only use the magnet for hanging the LED
light. The magnet are not intended to support additional
400
weight. Do not attach or hang anything additional to the
50
LED light or risk of breakage may occur.
150
The CMMT25165 has a two built in magnets. The base
magnet
10
the articulating head magnet
45
articulating head.
5
1. The magnets
230
metal parts such as screws and bolts.
2. The base magnet
place on solid metal surfaces.
3
Clamp (Fig. A, F)
35
CAUTION: Ensure area between extended clamp
10
and LED light is clear before releasing hook. Keep your
fingers out of the area between the clamp and the LED
light when it retracts.
1. To access the clamp
pull the clamp from the base of the light housing so that
it extends out from the housing
2. Place the object you want to clamp into the clamp
opening
housing
Hang Hook (Fig. A, G)
CAUTION: When the LED light hangs by the hang
hook, do not shake the LED light or the object from
which it hangs. Do not hang the LED light overhead or
from any electrical wires or anything that is not secure.
Personal injury or property damage may occur.
CAUTION: Only use the hang hook for hanging the LED
.
light. The hang hook is not intended to support additional
weight. Do not attach or hang anything additional to the
LED light or risk of breakage may occur.
CAUTION: Do not use the hang hook to reach with or
to support your weight in any situation.
The built in hang hook
hoses, pipes, tubes or cables in the space you are working in.
1. To access the hang hook
away from the housing
opening
2. Place the hose, pipe, tube or cable in your work space into
the hang hook.
2
.
nOTE: Ensure the LED light housing is fully secured and
7
,
will not slide off the anchored hose, pipe, tube or cable
before proceeding.
3. To remove the hang hook
pipe, tube or cable, grasp the hang hook
the anchored hose, pipe, tube or cable from the hang
hook opening
4. Secure the hang hook
located at the base of the housing
8
located on the tip of the
8
and
10
are intended for catching small
10
is also intended to hold the light in
11
, use the clamp indents
2
18
slowly allow the clamp to slide back into the
2
until the object is securely held in place.
can be be attached to anchored
13
13
, rotate the hang hook
2
until the hang hook
19
is exposed.
13
from the anchored hose,
.
19
13
into place onto the housing
English
2
and
12
to
.
13
13
and slide
2
.
5
Publicidad
