Setting The Temperature - Druck DryTC 165 Guia De Inicio Rapido

6. Setting the Temperature

1. Press the P key once to navigate to the SP2 screen.
2. Press the UP or DOWN arrow keys to set the desired temperature in the lower display.
Note: Pressing the UP and DOWN arrow keys will increase/decrease the temperature by
0.1 degree. Press and hold the UP or DOWN arrow key for 1 second to increase/decrease
the temperature more rapidly.
3. Press the P key to confirm the set temperature.
4. When task complete, set the ON/OFF switch to OFF and disconnect the power supply cord
from the IEC connector.
Copyright 2013 Baker Hughes Company.
English–DryTC / LiquidTC Calibrators | 5