Slave Mode - Cameo AZOR S2 Manual De Usuario

SLAVE MODE

Starting from the main display, press MENU to enter the main menu. Use
menu item Slave and confirm with ENTER. Connect the slave and master unit (same model, same
software version) using a DMX cable, and activate a stand alone mode on the master unit. The
slave unit will now follow the master unit. Alternatively, the control signal can be transmitted via
W-DMX (iDMX stick optionally available).
-------- Menu --------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
SYSTEM SETTINGS (Settings)
Starting from the main display, press MENU to enter the main menu. Using and , select the
menu item Settings and confirm with ENTER.
-------- Menu --------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
This will take you to the submenu for setting the submenu items (see table, select with
confirm with ENTER, change value or status with
Settings (factory setting)
Wireless Wireless
settings
(iDMX
stick
optional)
16
Slave
------ Settings ------
Wireless
Display
|
Service
iDMX Off
State
On
Signal To XLR
routing
Backup
by XLR
Receive
only
and , confirm with ENTER).
Wireless control disabled
Wireless control enabled
Signal -> DMX OUT
Backup via DMX IN with W-DMX signal interruption
W-DMX reception only
or to select the
and ,