Transportation, Storage And Disposal; Technical Data - Husqvarna KLIPPO LB 448S Manual De Usuario

• Examine the spark plug if the engine is low on
power, is not easy to start or does not operate
correctly at idle speed.
• To decrease the risk of unwanted material on the
spark plug electrodes, obey these instructions:
a) Make sure that the idle speed is correctly
adjusted.
b) Make sure that the fuel mixture is correct.
c) Make sure that the air filter is clean.
• If the spark plug is dirty, clean it and make sure that
the electrode gap is correct, refer to
on page 17 . (Fig. 47)
• Replace the spark plug if it is necessary.
To examine the fuel system
• Examine the fuel tank cap and the seal for the fuel
tank cap to make sure that there are no damages.
Transportation and storage
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
• Safely attach the product during transportation to
prevent damage and accidents.

Technical data

Engine
Brand
Model
Engine type
3
Displacement, cm
Speed, rpm
1912 - 002 - 13.10.2022
Technical data

Transportation, storage and disposal

Technical data
KLIPPO LB
448S
Honda
GCVX-145
Single cylin-
der, 4-Stroke,
Forced Air
Cooling, OHV
145
2900
• Examine the fuel hose to make sure that there are
no leaks. If the fuel hose is damaged, let a service
agent replace it.
To adjust the clutch wire
If the drive feels slow, it is necessary to adjust the clutch
wire.
• Turn the adjuster screw. (Fig. 48)
The clutch wire is correctly adjusted when the clutch
wire bracket aligns with the nut.
(Fig. 49)
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to
a Husqvarna dealer or discard it at a recycling
location.
KLIPPO LB KLIPPO LB
448SQ 453S
Husqvarna Honda
HS 166AP GCVx-170
Single cylin- Single cylin-
der, 4-Stroke, der, 4-Stroke,
Forced Air Forced Air
Cooling, OHV Cooling, OHV
166 166
2900 2900
KLIPPO LB KLIPPO LB
453SQ 548SQe
Husqvarna Husqvarna
HS 166AP HS 166AP
Single cylin- Single cylin-
der, 4-Stroke, der, 4-Stroke,
Forced Air Forced Air
Cooling, OHV Cooling, OHV
166 166
2900 2900
17