Publicidad
Idiomas disponibles
Idiomas disponibles
Bottom lamp
doesn't light on
Poor filtering effect
Constant temperature
effect is unavailable
Bathtub is scratched
NOTICE : The usage manual is only for reference, and all data subject to the actual product, any update without notice.
FAQ
How do you fill the spa?
Take your hosepipe. Put the plug in the tub and turn on the tap. The time it takes to fill the spa depends on the
water pressure and the size of the spa. On average, it takes between 1 and 4 hours.
How many times per year should the spa's water be changed?
It is very difficult to answer this question. It depends on 3 factors:
- How many people use the spa regularly?
- How many times a week is your spa used?
- Are you regularly monitoring the water treatment of your spa?
On average, the water should be changed every 3 months for a spa used every day by 2 people if the water is
being treated correctly. If you do not use your spa so regularly, you can change the water a bit less often.
How do I treat the water in my spa?
It is imperative to keep the water pure in your spa. Before getting into your spa, wash with soap and water to
eliminate bacteria and all traces of cream and deodorant (these products may reduce the efficiency of the
disinfecting products and the efficiency of the filters).
Never put bubble bath in your spa.
- The ozonater destroys the bacteria. It is a safe method, without smell, which must nevertheless be complimented
by a chemical treatment (bromine or active oxygen).
- A disinfectant product is necessary (bromine or active oxygen). The dosage of these products requires all your
attention to avoid not treating your water sufficiently or, on the contrary, attacking your spa and creating an
unpleasant smell if you overdose the products.
As there are different products on the market, with different concentrations, always ask advice from the person
who sold you your spa.
They will be a spa professional and will have knowledge and experience of treatment products for spas. They will
know which products work and which products do not.
Always check that the chemical products you are using are compatible with your spa's acrylic coating.
- The filter cartridges clear the water of residual impurities. The greater the surface of the filters, the more efficient
damaged
4. There is air in pipe
1. Bulb is broken;
2. Fuse is damaged.
1. Filter water pump is not
started;
2. Filter is not cleaned;
3. Filter water pump is
damaged.
1. Thermostat is damaged;
2. Power supply is unavailable.
3. Filter is jammed.
Replace the bulb
Replace the fuse
Start the filter water pump
Clean the filter
Replace the filter water pump
Repair or replace the thermostat
Check the power supply
Clean or replace the filter paper core
Grind with 2000# grinding paper with water, and
then polish with toothpaste and soft fabric
26
Publicidad
