Limited Warranty - GreenWorks STB80L01 Manual Del Operador

EN
Problem Possible
Cause
The ma- The guard is
chine not attached to
stops the machine.
when you
Heavy cutting
cut.
line is used.
Grass winds
around the mo-
tor shaft or the
trimmer head.
The motor is
overloaded.
The battery
pack or ma-
chine is too hot.
The battery
pack is discon-
nected from the
tool.
The battery
pack is deple-
ted.
English
Solution
Remove the battery
pack and attach the
guard to the machine.
Use only with the
nylon cutting line of
0.095" / 0.080" (2.4
mm / 2.0 mm) diame-
ter.
1. Stop the machine.
2. Remove the battery
pack.
3. Remove the grass
from the motor shaft
and trimmer head.
1. Remove the trim-
mer head from the
grass.
2. The motor will re-
cover to work as soon
as the load is re-
moved.
3. When you cut,
move the trimmer
head in and out of
the grass to be cut
and remove no more
than 8" in length of
the grass being cut
per pass.
1. Cool the battery
pack until its func-
tion returns to normal.
This is best done by
bringing the battery
into the shade or in-
doors.
2. Cool the machine
for approximately 10
minutes. Remove the
battery from the tool
to help the tool cool
down more quickly.
Install the battery
pack again.
Charge the battery
pack.
Problem Possible
Cause
The line Lines are wel-
does not ded to them-
advance. selves.
Not enough line
on spool.
Lines are worn
too short.
Lines are tan-
gled on spool.
The line The machine is
keeps used incorrectly.
breaking.
The grass Cut tall grass at
winds ground level.
around
the trim-
mer head
and motor
housing.
The line The cut-off
does not blade becomes
cut well. dull.
Vibration The line is worn
increases down at one
obviously. side and not ad-
vanced in time.
14

LIMITED WARRANTY

BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of four (4) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion
will repair or replace any and all parts found to be
14
Solution
Lubricate with silicone
spray.
Install more line.
Advance the cutting
line by bumping the
trimmer head.
1. Remove the lines
from the spool.
2. Wind the lines.
1. Cut with the tip of
the line, avoid stones,
walls and other hard
objects.
2. Advance the cutting
line regularly to keep
full cutting width.
1. Cut tall grass from
the top down.
2. Remove no more
than 8" in each pass
to prevent wrapping.
Sharpen the cut-off
blade with a file or re-
place it.
Make sure that the
line on both sides is
normal. Advance the
line.
GARANTIE OUTIL &