Operation; Preparing For Use - Tineco FLOOR ONE S2 Serie Manual De Uso

Operation

Preparing for Use

Before first use, please charge the appliance for 5 hours (refer to "Charging Instructions" for details).
* Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C).
AUTO MAX
Press the button and the appliance will start in
AUTO mode by default. Press it again to turn off
the appliance. Switch between AUTO and MAX
mode by pressing the
Stop Working
The appliance will stop working when put uprightly
and start running again when you recline.
* Do not recline more than 142° to protect against
water leakage.
Note:
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the appliance will switch off in 3 seconds after power off.
AUTO MAX
button.
Start Again
Tips:
• Solution mode/ Water Only mode:
Appliance starts with Solution mode by
default. Power on while the appliance is
upright, long-press
between the two modes.
• Switch to Water Only mode:
LED Loop: Red → Blue (use water only)
• Switch to Solution mode:
LED Loop: Blue → Red (use cleaning solution)
Place the appliance on the storage tray
vertically after use.
10
AUTO MAX
for 3s to switch