To Use The Tree Felling Technique - Husqvarna 350i Manual De Usuario

WARNING:
risk when you use the limbing technique.
Kickback information on page 18 for
Refer to
instructions how to prevent kickback.
WARNING:
careful when you remove small limbs and do
not cut bushes or many small limbs at the
same time. Small limbs can get caught in the
saw chain and prevent safe operation of the
product.
Note:
If it is necessary, cut the limbs piece by piece.
Cut the smaller branches (A) and (B) before you cut the
limb near the trunk (C).
1. Remove the limbs on the right side of the trunk.
a) Keep the guide bar on the right side of the trunk
and keep the body of the product against the
trunk.
b) Select the applicable cutting technique for the
tension in the branch.
WARNING:
about how to cut the branch, speak
22
There is a high accident
Cut limbs one by one. Be
A
B
C
If you are not sure
to a professional chainsaw operator
before you continue.
2. Remove the limbs on the top of the trunk.
a) Keep the product on the trunk and let the guide
bar move along the trunk.
b) Cut on the push stroke.
3. Remove the limbs on the left side of the trunk.
a) Select the applicable cutting technique for the
tension in the branch.
WARNING:
about how to cut the branch, speak
to a professional chainsaw operator
before you continue.
To cut trees and branches that are in tension
Refer to
on page 25 for instructions on how to cut branches that
are in tension.

To use the tree felling technique

WARNING:
to fell a tree. If possible, engage in
a training course in chainsaw operation.
If you are not sure
You must have experience
1844 - 003 - 28.07.2022