Publicidad
Idiomas disponibles
Idiomas disponibles
Notes for adjustment of the horizontal stops
Horizontal movability is ensured by the rubber‐metal or pendulum bearing. The horizontal
stops should be adjusted in compliance with the maximum permissible horizontal shift
(see chapter 7 on page 21).
Notice
Precautions during operation:
S
Deposits such as dirt or corrosion particles from the tank can falsify measurement
results.
S
The limits for movability and loading capacity specified in the Specifications must not
be exceeded.
S
Horizontal shifts that exceed the maximum permissible value and do not act in the
direction of the stay rod are to be avoided by aligning the other modules appropriately,
or to be taken up by other stops or devices.
S
The movement tolerance of the stay rod should be checked regularly and readjusted,
if necessary.
14
RTN/M2
MOUNTING
Publicidad
