Frost Protection; Care And Maintenance; Maintenance Intervals - Kärcher HD 7/15 G Manual De Instrucciones

Transport
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
 Coil the high-pressure hose and hang it
over the hose storage.
 Insert the spray lance into the spray
lance cart.
Place the trigger gun into the holder.
 Use the pushing handle to push the ap-
pliance.
 When transporting in vehicles, secure
the device according to the guidelines
from rolling away, slipping and tipping
over.
 To reduce the space requirement, loos-
en the star grips and swivel the push
handle backwards.
Storage
CAUTION
Risk of personal injury or damage! Consider
the weight of the appliance when storing it.
This appliance must only be stored in inte-
rior rooms.

Frost protection

ATTENTION
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
In the winter, preferably store the device in
a heated room
If storing it in unheated rooms, follow these
instructions:
Drain water
 Screw off water supply hose and high
pressure hose.
 Operate device for max. 1 minute until
the pump and conduits are empty.
 Unscrew the water filter and empty it.
Flush device with anti-freeze agent
Note: Observe handling instructions of the
anti-freeze agent manufacturer.
 Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
22
All manuals and user guides at all-guides.com
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Note: The maintenance plan given below
only lists the maintenance tasks for the
high-pressure pump. The maintenance
tasks for the engine must also be done ac-
cording to the details given in the operating
instructions manual of the engine manufac-
turer.
Risk of injury if the machine is left running
in an unattended state.
Before working on the device, turn the start-
er to "0/OFF" and remove the spark plug
connector.
Risk of burns! Do not touch hot mufflers,
cylinders or radiator ribs.
Daily
 Check the high pressure hose for dam-
Weekly
 Check oil level.
Please contact Customer Service immedi-
ately if the oil is milky (water in oil).
Monthly
 Clean water filter.
 Clean filter at the detergent suck hose.
 Check the fastening elements between
After 500 operating hours, at least
annually
 Change the oil in the high pressure
– 7
EN

Care and maintenance

DANGER

Maintenance intervals

ages (risk of bursting). Please arrange
for the immediate exchange of a dam-
aged high-pressure hose.
the motor and frame for cracks; have
cracked fastening elements replaced by
Customer Service.
pump.