Ground Lift Switch - Ashdown Engineering DOUBLE DRIVE Guia Del Usuario

ASHDOWN ENGINEERING - DOUBLE DRIVE
TOP PANEL
VU METER 1
This is used to monitor the input level of your instrument. The Left Blue LED lights up
in the VU when DRIVE 1 is selected.
VU METER 2
This is used to monitor the output level of the pedal. The VU Blue LED lights up
when DRIVE 2 is selected.
DOUBLE DRIVE
USER GUIDE
GAIN
This is used to set the overall amount of distortion for Drive 1.
LOUD
This is used to set the overall output of Drive 1, set to off and no sound will be
heard.
TONE
This controls the tone of the drive, add more for a trebley sound, less for a bassier
tone.
GRIT
This is used to set the overall amount of distortion for Drive 2.
BURN
This is used to set the overall output of Drive 2, set to off and no sound will be
heard.
DRIVE 1 SWITCH
Use this foot switch to engage Drive.1.
DRIVE 2 SWITCH
Use this foot switch to engage Drive. 2. You can stack the drives on top of each other
by turning both foot switches on, for even more overdriven sounds.

GROUND LIFT SWITCH

The ground lift switch eliminates unwanted hum and buzz if you are plugging into
noisy mains power.
USER GUIDE