Descargar Imprimir esta página

Care & Maintenance - Victor ANDOVER VWRP-3200 Manual De Operación

Publicidad

Idiomas disponibles

Idiomas disponibles

General Care
• When unplugging the power plug, always pull directly on the plug. Never pull the cord.
• To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray.
• Do not attempt to clean the unit with chemical solvents. Use a clean, soft, dry cloth.
• Be sure to unplug the unit if you will not intend to use it for an extended period of time.
How to Replace the Turntable Stylus
The stylus should last about 50 hours under normal use. However, it is recommended that the stylus
be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus may
damage the record. The higher speed of 78 RPM records wear out the stylus more quickly.
Remove the Old Stylus
1. Hold the turntable cartridge firmly with one hand as illustrated in Fig. A.
2. Push down the front edge of the stylus use other hand as illustrated in Fig. B.
3. Rotate the stylus as illustrated in Fig. C.
4. Rotate the stylus down and outward as illustrated in Fig. D.
Fig. A
Install the New Stylus
1. Hold both sides of the stylus and place the back of the stylus on the tip of the cartridge.
2. Rotate the stylus up and inward until it is flush with the cartridge.
3. Push the stylus tip towards the cartridge until you hear a click.
Step. 1
How to Maintain Vinyl Records
Too prolong the life of your vinyl records, following the handling, cleaning, and storing tips below.
Handling
Skin oils can gradually deteriorate the quality of your record. Do not touch the record's
grooves. Only handle records by the edges or its center. Make sure your hands are clean
when handling a record.
Static will deteriorate the sound quality and collect dust. Brush the record with an anti-static
brush before and after playing.
When checking the record, never use a UV light or direct sunlight, an LED light is
recommended if needed.
Cleaning
• If you find any dust, finger marks or other residue on the record surface, gently wipe the
surface in a circular motion with a dry soft anti-static lint-free cloth or brush.
CARE & MAINTENANCE
Fig. B
Step. 2
Fig. C
Step. 3
12
2022.07.2
6 09:20:12
+08'00'
Fig. D

Publicidad

loading

Productos relacionados para Victor ANDOVER VWRP-3200