Troubleshooting Guide - Victor ANDOVER VWRP-3200 Manual De Operación

Storing
• To avoid dust and scratches, Keep records in their sleeves, jackets, or vinyl record crate when
not in use.
• Store records in a clean, cool, dry, static-free and UV-free environment.
• Store records vertically, not horizontally, to prevent them crushing one another.
• Do not store your records in the trunk of your car. The temperature in a closed trunk can ruin
your collection.

TROUBLESHOOTING GUIDE

If you experience any issues with the unit, please review the possible solutions below before returning
or calling for maintenance.
Symptom Possible Cause(s)
Power
Adapter had not been connected or
connected incorrectly
No power (Power
Indicator is off) The unit is not switched on.
Power outage
Turntable mode
Noise or sound Speed Selector set incorrectly
distorted The stylus is worn
AUX in mode
The external play is connected
incorrectly or malfunctioning.
The Aux in cable is plugged in the
wrong jack(s).
No sound
The unit is not turned on or the
volume is set to minimum.
The volume of the connected player
Low sound
or/and the turntable is set to low.
Bluetooth mode
Bluetooth not The playback mode is set incorrectly Turn the Function Knob to "BT" position.
functioning
The Bluetooth connection fails.
FM mode
Station not tuned properly.
Noise or sound
Bad radio reception.
distorted
Bluetooth transmitter mode
The unit is not powered on or not in
the proper mode.
No Sound Bluetooth connection fails.
The connected player does not work Ensure the listening device works correctly when not connected to
Solution(s)
Use the original adapter to connect the unit to wall outlet as
instructed in the manual.
Switch the unit on.
Wait the power supply back to normal or use other AC power supply.
Set the Speed Selector to the same speed as the RPM of the record.
Replace the stylus with a new one.
Connect the external audio player as described in this manual.
Ensure the audio player works correctly when not connected to the
unit.
Connect one end of the Aux in cable to Headphone jack, AUX out
jack or Line out jack of the player, the other end to the AUX IN jack
on the unit.
Change with another Aux in cable if necessary.
Turn on the unit and set the volume to high.
Set the volume to high.
Connect the player to the unit as indicated in the manual.
Tune the radio station to a proper position.
Extend the FM antenna to different positions or connect the antenna
to Outdoor antenna system to improve the radio reception.
Turn on the unit and set to Bluetooth Transmitter mode.
Connect the unit to the listening device as instructed in the manual.
the unit.
13
2022.07.2
6
09:20:16
+08'00'