Publicidad
Idiomas disponibles
Idiomas disponibles
level over the total working period.
Iden fy
safety measures to protect the operator from the effects of vibra
the tool and the accessories, keep the hands warm, organisa
APPLICATION
The table saw is designed for the cu
of
not designed for commercial use.
are devoted to con
the technical performance and design concept of products may vary without any prior
for any possible incurrence of inconvenience therefrom. Read and follow the opera ng instru ons and
safety informa
efore using for the firs
WARNING !
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Read all
safety warnings and all instruc
Failure to follow the warnings and instruc
shock, fire and/or serious injury.
Make sure the voltage corresponds to the type label on the unit.
Packing materials are no toys! Children must not play with plas
The power tool noise output may exceed 85dB(A) at the workplace. In this instance, wear ear prot
SYMBOLS
The following symbols are important for the opera
the symbols helps you operate the power tool more save.
Read the manual
Warning
GENERAL SAFETY
Warning !
Read all safety warnings and all ins
s. Failure to follow the warnings and ins
in electric shock, fire and/or serious injury. Save all warnings and ins
term "power tool" in the warnings refers to your mains-operated (corded) power tool or ba ery-operated
(cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Clu ered or dark areas invite accidents.
2
such as: maintain
work pa erns.
and plas
commensurate with the machine's size. It is
improving and perf
the exis
products. Therefore,
ave this manual
may result in electric
ger of suffoca
of your power tool. The correct interpreta
Wear dusk mask
Do not dispose of old appliances in the
household garbage
Disconnect from power supply while
maintance
s may result
s for future reference. The
GB
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while opera
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Our apology
c) Do not expose power tools to rain or wet c
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric
shock.
e) When opera
suitable for outdoor use reduces the risk of electric shock.
f) If opera
protected supply. Use of an RCD reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when opera
use a power tool while you are red or under the influence of drugs, alcohol or medica
ina en
b) Use personal prot
of
mask, non-skid safety shoes, hard hat, or hearing prot
personal injuries.
c) Prevent uninten
source and/or ba ery pack, picking up or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjus
to a rota
e) Do not overreach. Keep proper f
tool in unexpected situa
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the c
connected and properly used. Use of dust c
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your applica
do the job be er and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the ba ery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preven ve safety measures
reduce the risk of st
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these ins
users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condi
before use. Many accidents are caused by poorly maintained power tools.
a power tool. Distr
Water entering a power tool will increase the risk
a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
a power tool in a damp loca
is unavoidable, use a residual current device (RCD)
ra
ower tools may result in serious personal injury.
ve equipment. Always wear eye prot
st
g. Ensure the switch is in the off-pos on before conn
key or wrench before turning the power tool on. A wrench or a key le a ached
ower tool may result in personal injury.
and balance at all
of dust extr
can reduce dust-related hazards.
ower tool accidentally.
to operate the power tool. Power tools are dangerous in the hands of untrained
that may affect the power tool's opera
GB
can cause you to lose
a power tool. Do not
A moment of
Protec ve equipment such as dust
used for appropriate c
s will reduce
ng to power
This enables be er control of the power
and c
f
ensure these are
The correct power tool will
If damaged, have the power tool repaired
3
Publicidad
