Publicidad
Idiomas disponibles
Idiomas disponibles
Technical Data
Welding helmet
Art. No
Type of electricity supply
Protective glass
Protective glass, Dimensions L x W x H
Visual field L x W
Response time light/dark
Response time dark/light
Darkness value
Lightness value
Recommended Ambient Operating Temperature
Dimensions L x W x H
Net/gross weight
Li-Ion battery
Voltage
Capacity
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions of Use
This welding helmet protects the eyes and face
against sparks, splashes and UV radiation during
welding and adjusts automatically to the light
conditions. It ensures immediate, sensor-controlled
darkening in the event of ignition of the arc and
automatic lightening again once the welding process
has finished (including short delay to protect against
any afterglow).
The welding helmet has a fully-adjustable DIN pro-
tection level with adjusting wheel to the side.
The welding helmet can also be adjusted for flying
sparks with welding and cutting work.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Always pass on the device to third parties toge-
ther with these operating instructions.
The filter response time slows if the temperature
exceeds or falls below that specified.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Since the use of the device if handled incorrectly
can entail considerable risks, only knowledgeable
persons may be entrusted with the use of it.
The operator must be appropriately trained in set-
ting up, operating and using the machine.
Qualification: Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Minimum age: Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Using the appliance only requires corres-
ponding training by a professional or the Operating
Instructions. No special training is necessary. The
operator is responsible for accidents or risks to third
parties.
Residual Risk
Despite the observance of the operating instructions
there still may be some hidden residual risks.
ENGLISH
GSH-3S-VL-TC-2
16926
Li - CR 2450 / Li-Ion
379 DIN
124,5 x 100,5 x 18 mm
98 x 55 mm
0,1 ms
100 - 800 ms
DIN 5-9/9-13
DIN 4
-5 °C - 40 °C
242 x 231 x 358 mm
0,71 kg / 1,03 kg
3,7 V
1000 mAh
27
Publicidad
