Ruroc ATLAS 4.0 Manual De Instrucciones página 6

CHIN-CURTAIN
Chin curtains (or Wind stops) are essential
to keeping unwanted excess air from
entering your helmet at high speeds. Not
only does this small device prevent you
from being hit with high velocity wind but also
helps to reduce noise as well as minimises
dust, fumes and bugs. To install the chin curtain,
centralise the unit to be perpendicular to the chin
vents, use the central clip to gently engage a positive
connection with the internal locking pin. On either side
of the chin curtain there are two more wings that are to be
connected to each side of the EPS, for ease of use unfasten the
cheek pads (Hint. the cheek pads also connect into this same
locking point). To remove simply follow the steps above in reverse.
CLOSED
(RIGHT)
AT4_MAN_01-00
OPEN
(LEFT)
OPEN/CLOSE
TOP VENT
All ATLAS 4.0's are equipped with a front
open/close vent to give you more control
over airflow. Increased airflow (open
position) will help to keep your head cooler
on warm days. Reduced airflow (closed
position) will help to keep you warm on
cooler days.
RAID AIR-CONTROL
Thanks to our patented Atlas RAID
system your helmet's airflow is second-
to-none! At the flick of a switch you are
able to transfer air directly to yourself
or to the visor. This 'switch' is an open/
close vent at the inside front of the chin-
guard. When the vent is closed the air
is transferred to the visor creating clean
fog-free vision. When it is opened it offers
the rider more air to breathe.
06