Menu Styles - TMEZON MZ-VDP-NE202 Manual De Instrucciones

Menu styles

1:Win10 style
2: Android style
3: Standard style
Three styles of interface can be set through the menu. No need to restart the monitor
GB - 15 support@tmezon.com
Setting
Language
Device-ID
System
Menu style
Keytone
Factory settings
Time
software upgrade
Restart the system
Formatting SD
Network
SD remaining space
Software version
Digital Frame
System
1. Please format the SD card with the device.
2. Restore factory settings: All parameters are restored to factory mode. Note that
TuyaSmart's device must be deleted together before it can be used again, otherwise it
cannot be added and used by other accounts.
3.The Device ID is an important configuration of the equipment in the system.
It must be configured correctly,Otherwise it will not work properly. If the current device
is connected to the Outdoor unit1, Device ID must be set to 1, and the others Slave monitors
must be set 2/3/4/5/6, then work normally.
Time
1: (Screen off): Monitor will be off with no operation within 10s
2: (Clock): Time will be displayed on the screen at standby mode
Digital Frame
1: The picture file must be copied to the Digital Frame folder, the picture resolution
must not be greater than: 2526x1576, the format is JPEG.
2: Long press the file to pop up the submenu, select "Delete" or "Delete All", and click
the file to enter the playback interface.
GB - 16
English
1
Win10
on
ok
ok
ok
ok
18.6G/128G
V1.01-20201216
support@tmezon.com