Basic Operation; Playback; Playing A Source - Yamaha A-S201 Manual De Instrucciones

BASIC OPERATION

Playing a source

Input selector
buttons
TREBLE –/+
BASS –/+
BALANCE L/R
VOLUME +/–
SPEAKERS A/B
10
En

PLAYBACK

1
2
A (power)
3
Notes
• When one set of speakers is connected using bi-wire
connections, or when using two sets of speakers simultaneously
(A and B), make sure SP A and SP B are displayed on the front
panel display.
• When listening with headphones, turn off the speakers.
4
5
6
y
• You can also use the buttons or knobs on the front panel if they
have the same or similar names as those on the remote control.
• For recording, see page 4.
Press A (power) to turn on this unit.
Press one of the Input selector buttons to
select the desired input source.
Press SPEAKERS A and/or SPEAKERS B on
the front panel to select desired speaker(s).
Play the source.
Press VOLUME +/– to adjust the sound
output level.
y
You can adjust the tonal quality by using BASS –/+,
TREBLE –/+, and the left/right sound balance of speakers
by using BALANCE L/R (see page 5).
When finished listening, press A (power) to
set this unit to standby mode.
Press A (power) to turn this unit on again.