Publicidad
Active USB 2.0 Extension Cable
EN
Rallonge Active USB 2.0
FR
• Use product, product parts and accessories only in per-
fect condition.
• Avoid stresses such as heat and cold, moisture and di-
rect sunlight, microwaves, vibrations and mechanical
pressure.
• In case of questions, defects, mechanical damage, trou-
ble and other problems, non-recoverable by the docu-
mentation, contact your dealer or producer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against
accidental use.
Tripping hazard
Risk of injury by stumbling and falling.
• Route the cable safely.
• Install the system and devices attached to it in a way
that persons cannot be injured, or objects not be dama-
ged for example by dropping or stumbling.
Heat accumulation
• Do not cover the product.
• Keep enough space around all devices for a good vent-
lation and free motion and to avoid damages.
2 Description and function
2.1 Product
The product is an active USB extension cable with integ-
rated signal amplifier for loss-free transmission of signals
over long distances. The product supports Plug&Play and
does not require an external power supply.
2.2 Scope of delivery
Active USB 2.0 Extension Cable, User Manual
2.3 Operating Elements
See Fig. 1.
1 USB A 2.0 socket
3 Intended use
This product is intended exclusively for private
use and its intended purpose. This product is not
intended for commercial use. We do not permit
using the device in other ways like described in chapter
„Description and Function" or in the „Safety Instructions".
Use the product only in dry interior rooms. Not attending to
these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and in-
tegrity.
2. Compare the specifications of all used devices and en-
sure compatibility.
5 Connection and operation
1. Connect a signal source to the USB A 2.0 socket (1) of
the USB extension cable.
You can also connect several USB extension cables to-
gether. Signal transmission is possible over a total length
of max. 20 m.
2. Connect an output device (e.g. PC) to the USB A 2.0
plug (2) of the USB extension cable.
3. Wait until the device has been recognised.
4. Disconnect the cable connections after use.
6 Maintenance, Care, Storage and Trans-
portation
The product is maintenance-free.
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
REV2022-12-14
Subject to change without notice. |
V1.0aw
Sous réserve de modifications.
2 USB A 2.0 plug
Material damage
7 Disposal instructions
7.1 Product
According to the European WEEE directive, electri-
cal and electronic equipment must not be disposed
with consumers waste. Its components must be re-
cycled or disposed apart from each other. Otherwi-
se contaminative and hazardous substances can damage
the health and pollute the environment.
As a consumer, you are committed by law to dispose elect-
rical and electronic devices to the producer, the dealer, or
public collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol
on the product, in the user manual, or at the packaging all-
udes to these terms. With this kind of waste separation, ap-
plication, and waste disposal of used devices you achieve
an important share to environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the
suitable collection points – paper belongs in paper
bins, plastics belong in yellow sacks and glass be-
longs in used glass bins.
DE4535302615620
8 EU Declaration of conformity
With the CE sign Goobay®, a registered trade-
mark of the Wentronic GmbH ensures, that the
product is conformed to the basic European
standards and directives.
1 Consignes de sécurité
Le mode d'emploi fait partie intégrante du produit et com-
prend d'importantes informations pour une bonne installati-
on et une bonne utilisation.
• Lisez le mode d'emploi attentivement et complètement
avant de l'utiliser.
Le mode d'emploi doit être disponible à des incertitudes et
transfert du produit.
• Conservez soigneusement ce mode d'emploi.
• Ne pas ouvrir le boîtier.
• Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il
doit au contraire être protégé contre toute utilisation invo-
lontaire.
• Utilisez le produit, pièces et accessoires des produits
uniquement en parfait état.
• Éviter des conditions extrêmes, telles que la chaleur ex-
trême et froid, l'humidité et de la lumière directe du so-
leil, ainsi que microondes, des vibrations et de la pres-
sion mécanique.
• En cas de questions, les défauts, les dommages méca-
niques, des ingérences et d'autres problèmes, non ré-
cupérables par la documentation, contactez votre re-
vendeur ou le producteur.
Non destiné à des enfants. Le produit n'est pas un jouet !
• Sécuriser l'emballage, petites pièces et l'isolation contre
l'utilisation accidentelle.
Risque de trébucher
Risque de blessure en cas de trébucher
• Pose de câbles en toute sécurité.
• Installez le produit de sorte à ce qu'aucune personne ou
aucun objet ne puisse être blessé/endommagé en chu-
tant, trébuchant, etc.
Accumulateur de chaleur
• Ne couvrez pas le produit.
• Laissez toujours suffisamment d'espace qu'autour du
système afin de garantir une ventilation appropriée et
de l'espace entre les appareils pour ne pas risquer de
les dommager.
- 3 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
Goobay® by Wentronic GmbH
Publicidad
