Setting Brightness Level Of The Backlight For On State - Keysight Technologies U1701B Guía Del Usuario Y Servicios

3 Default Setting Configurations

Setting Brightness Level of the Backlight for ON State

This option is used to set the brightness level for the backlight during ON state. It
is used to set brightness after the backlight is turned on. It can be set from
oFF~09. When you turn on the backlight during normal operation, press SET key
once to increase one level. The adjusting range is from default to 09 then back to
default settings. For example, if the brightness level is set to 05, press SET key to
increase the level from 05 until 09 then back to 05 after the backlight is turned on
as normal operation. If the default is set to 09, there will be no changes when the
SET key is pressed.
Figure 3-11
56
Brightness level for ON state
Keysight U1701B User's and Service Guide