Storage Maintenance And Transportation - D Devices D LOCATOR Manual De Instrucciones

a) The storage environment should be clean and must be disinfected regularly;
b) Product storage must be batched and marked and recorded.
6.10 Transportation
1. Prevent excessive shock and vibration during transportation, and handle with
care;
2. It should not be mixed with dangerous goods during transportation.
3. Avoid exposure to sun or rain or snow during transportation.
The cleaning and disinfection of main unit and the measuring wire are as fo-
llows.
• Before each use, wipe the surface of the machine and the measuring wire with
a soft cloth or paper towel soaked in 75% medical alcohol. Repeat the wipe for
at least 3 times.
• After each use, wipe the surface of the device and the measuring wire with a
soft cloth soaked in clean water (distilled or deionized water) or a clean dispo-
sable wipe. Repeat the wipe for at least 3 times.
7 Storage, maintenance and transportation
7.1 Storage
7.1.1 This equipment should be stored in a room where the relative humidity is
10% to 93%, atmospheric pressure is 70kPa to106kPa, and the temperature is
-20C +55C.
7.1.2 Avoid the storage in a too hot condition. High temperature will shorten the
life of electronic components, damage battery, reshape or melt some plastic.
7.1.3 Avoid the storage in a too cold condition. Otherwise, when the tempera-
ture of the equipment increases to a normal level, there will be dew that will
possibly damage PCB Board.
7.2 Maintenance
33