Publicidad
Idiomas disponibles
Idiomas disponibles
Satellite Antennas User Manual ver. 2.0
2.4 Equipment and cable installation
This offers a general explanation of how to install the Control Box and satellite receiver
properly to the inside of vessel connecting with coaxial cable.
1. The coaxial cable is routed from the antenna to the Control Box inside the vessel.
2. After once deciding where to place the Control Box and satellite receiver, make sure
that both units are placed in a dry and protected area.
3. The Control Box and satellite receiver should be placed away from any heat source
and in an area with proper ventilation.
4. Ensure that there are at least 3cm of space around both units for ventilation and
connection of cables. Do not stack the units on top of each other.
5. Connect the coaxial cable to the Ocean Line antennas port on the back of the Control
Box
6. Connect the second coaxial cable between the Control Box and the satellite receiver
Publicidad
