Changing Channels; Watching Tv; Switching Between Satellites; Changing Channels - VDO SAA110287EA Manual De Instrucciones

Satellite Antennas User Manual ver. 2.0

3.3 Changing channels

If you have followed the installation instructions, your system should be set to the
satellite of your choice and the system should have downloaded the appropriate channel
guides. When the Ocean Line antenna systems and satellite receiver is properly
configured, it is easy to change the channel using the remote control that normally
comes with the receiver unit.

3.4 Watching TV

The Ocean Line antennas are designed to operate as efficiently and as reliably as
possible when the vessel is moved and anchored. It is also the quickest satellite
acquisition system available among the Ocean Line antennas. If you have anchored the
vessel and the antenna has completed to searching selected satellite, turn off Control
Box Power to avoid unnecessary use of power. Because the LNB receives its power
from the Satellite Receiver through the Control Box, the antenna will continue to receive
the satellite TV signals.

3.5 Switching between Satellites

You can switch between satellites using the IDU by pressing Satellite select buttons.
Follow the steps below to switch to another satellite.
1. Ensure that the LCD screen of the IDU is displayed.
2. Press the Satellite select buttons to switch to another satellite.
3. The antenna shifts to track selected satellite. Wait for the Tracking Satellite
screen to reappear with the ID of selected satellite displayed.
HOTBIRD ID: HOT
AUTO_SLP S : 280
Figure 3-1 Control Box LCD Screen