Installation - Diono Monterey 4DXT Manual De Instrucciones

INSTALLATION

WARNING! Unsecured objects can become flying hazards
and can cause serious injury in an accident. If your vehicle
is equipped with lower anchors, Diono always recommends
installation utilizing the LATCH/UAS connectors with this
booster seat.
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows secure
attachment to a vehicle's lower anchor locations.
1. Disengage LATCH/UAS connectors
from storage slots and lay booster
seat on its side. While depressing the
cam lock lever, pull LATCH/UAS
connectors away from the booster
seat and extend both straps all the
way.
2. Attach both LATCH/UAS connectors to the vehicle
anchors, starting with the connector that is furthest from
you. For ease of use, make sure open end of hooks face
upward during use.
2
18
monterey 4DXT
3.
4.
1
IMPORTANT:
interferes with vehicle seat belt.
IMPORTANT:
position, make sure it is stable and does not rock from side
to side.
While pushing booster against
vehicle seat, pull one adjuster strap
tight and then the other. Make sure
that both LATCH/UAS connectors are
securely attached to the vehicles
lower anchors.
NOTE: Even with LATCH/UAS connectors properly
attached and adjusted, child seat will still have movement
against the vehicle seat back and bottom.
Booster seat should rest firmly on
vehicle seat bottom and touching
the vehicle seat back. A gap is
acceptable as long as the head
support is touching the vehicle seat
back or headrest.
IMPORTANT: Try to position backrest in full contact with
vehicle seat back. It may also be necessary to adjust the
recline angle of the booster seat to match that of the
vehicle seat.
Do not use LATCH/UAS if installation
When using booster seat in center seating
diono.com
INSTALLATION
3
4
19