Backless Booster - Diono Monterey 4DXT Manual De Instrucciones

SECURING THE CHILD
PROPER BUCKLE POSITION
IMPORTANT: After booster seat is installed and seat belt is
fastened around child, it is important to confirm correct seat
belt buckle position to ensure secure installation.
CORRECT SEAT BUCKLE
POSITION
Buckle is on the outside of
lower belt guide.
24
monterey 4DXT
INCORRECT SEAT BUCKLE
POSITION
If buckle is being pulled
across the lower belt guide
and into the seat, choose
another seating position
within the vehicle.
While this booster seat is designed to offer advanced
side-impact protection with its backrest section attached, the
seat bottom can also be used alone as a backless booster.
WARNING! Use ONLY the lap and shoulder belt system
when restraining the child in this booster seat.
lap belt only.
WARNING! ONLY use with children
whose ears are below the top of the
vehicle seat or headrest.
1. Remove the backrest by reversing
the steps shown in "Seat Assembly."
2. Make sure both LATCH/UAS
connectors are securely attached to
the vehicles lower anchors. While
pushing booster against vehicle seat,
pull the adjuster straps tight.
3. The booster seat should rest firmly
on vehicle seat bottom and
touching the vehicle seat back. The
entire seat bottom should sit flat on
the vehicle seat.
diono.com

BACKLESS BOOSTER

DO NOT use
2
3
25