Grille & Blade Removal; Cleaning - Vornado 5303DC Guia Del Propietario

GRILLE & BLADE REMOVAL
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing blade.
REMOVABLE GRILLE
1. Using a phillips head screwdriver, remove grille by unscrewing the
4 screws located along the perimeter of the inlet grille at roughly
2, 5, 7, and 10 o'clock positions. This will release the grille. To
reattach, position grille so the logo in the center of the grille is
straight. Align the Locator Pin to reconnect grille. Once aligned
replace screws.
2. Dust or wash with a mild dishwashing soap. Do not place grille in
the dishwasher. The excessive heat can distort the plastic.
BLADE REMOVAL
1. It is possible to remove the blade should something accidentally
get wrapped around the motor shaft. First, remove the nut from
the shaft. Turn the nut clockwise to loosen. Pull the blade straight
out from the shaft. When replacing, the blade can only go on the
shaft one way. Be certain the flat side of the shaft aligns directly
with the corresponding flat side on the blade's socket. Push the
blade all the way on the shaft until it bottoms out. Do not use a
hammer as this could result in bearing damage. Reinstall nut.
2. Wipe blade with a damp cloth. If your Air Circulator is used in a
greasy environment, such as a kitchen, mild soap or a common
household cleaner may be necessary. Do not use solvents.
14 English
Screw
Screw
Locator Pin

CLEANING

Because your product moves a substantial amount of air, it will need regular cleaning to remove lint, dust and grime. Never clean the product in
any manner other than instructed in this owner's guide.
WARNING
Observe the following safety information to avoid risks and
property damage.
Screw
Do power off and unplug your product before cleaning
†
Do Not use gasoline, thinners, solvents, ammonias or other
†
chemicals for cleaning.
Do Not attempt to repair or replace parts.
†
The motor is permanently lubricated and requires no oiling.
Screw
1. Dust or wipe the circulator with a damp cloth.
2. Use the brush attachment on your household vacuum cleaner to
vacuum any accumulated dust.
15
English