Error Messages / Display Messages - SPORTSTECH FX3 Pro Manual De Instrucciones

ERROR MESSAGES / DISPLAY MESSAGES

Visible
Possible cause
display
1
The security key has been removed
from the security lock.
3
Lower control error
7
Engine anomoly, open circuit in the
8
Transmission error
9
Overload protection
10
Protection against power surges
11
Excess current protection
12
Short circuit in the motor
14
Fault in the sensor
15
Low voltage protection
1. Check whether the safety switch is in the intended
2. Check whether the safety switch connector is loose
Open circuit in the switch tube
1. Check whether the motor wire is loose or has fallen
2. Check / replace the motor.
engine
3. Check / replace the control unit.
1. Check whether the communication cables are loose,
2. Check or replace the display panel
3. Check the control and whether the LED light is on
4. Check or replace the controller
1. Check for overcurrent.
2. Check whether the moving operating parts of the
3. Check whether there is a lack of lubricant.
4. Check the device for extreme wear.
5. Check for short circuit in the motor.
6. Check / replace the control unit
1. Check the voltage of the power supply.
2. Check / replace the control unit.
1. Check for overload.
2. Check whether the moving operating parts of the
3. Check whether there is a lack of lubricant.
4. Check the device for extreme wear.
5. Check for serious short circuit in the motor.
6. Check / replace the control unit
7. Check / replace IGBT.
1. Check whether there are foreign objects at the out-
2. Check / replace the engine.
1. Check / replace the sensor assembly of the motor.
1. Check the voltage on the power supply.
2. Check / replace the controller.
37
Proposed solutions
position.
or has fallen off.
off.
dropped or damaged.
device are blocked.
device are blocked.
put end of the controller that lead to a short circuit.
EN