2. HOW TO USE
PARTS
A. Spray nozzle
B. Water filling cover
C. Steam regulator
D. Burst steam button
E. Spray button
F. Temperature control switch
G. Water reservoir
H. Indicator light
I. Soleplate
J. Up cover handle
K. Cord guard
L. Handle
M. Back cover
N. Heat insulating plate
P. Self-cleaning
BEFORE FIRST USE
• A small amount of smoke will be produced the first time, It is normal and it will
quickly disappear.
• When using the steam function for the first time, do not direct the steam towards
the laundry, as there could be debris from the steam vents.
FILLING WATER TANK
• We recommend the use of distilled water.
• Make sure that both the steam control knob and the temperature control dial are
in "MIN" position.
• Hold the iron in 45º position.
• Fill with water through water filling inlet until the water reaches the "MAX" mark
indicated on the side of the iron, and never fill above this mark.
SETTING TEMPERATURE
Follow the ironing instructions on the garment label. If there is no instruction but you
do know the kind of fabric, please consult the following table.