Multizone - Bauknecht HVS5 TH8VS3 ES Guía Rápida

Setting the timer
To set the timer, long-press the middle button: the display shows
0.00 and the bell symbol flashes. Set the timer using the button +
(the maximum programmable value is 23 hours and 59 minutes). The
countdown begins after a few seconds. The display shows the time of
day and the bell remains lit, confirming the timer has been set. To view
the countdown and change it if necessary, press the middle button
again.
Setting cooking time
After selecting the cooking mode and temperature using the knobs,
press the middle button: the display shows 0.00 and the bell symbol
flashes. Press the middle button again: on the display
appear in sequence and AUTO flashes. Set cooking time using the
buttons + and – (the maximum programmable value is 10 hours). After
a few seconds the display shows the time of day and AUTO remains
lit, confirming the setting. To view the remaining cooking time and
change it if necessary, press the middle button for 2 seconds and then
press it again a second time. At the end of the set time, the symbol
switches off, the alarm sounds and AUTO flashes on the display.
Press any button to deactivate the alarm. Return the functions and
temperature knob to zero and press the middle button for two seconds
to end cooking.
• COOKTOP OPERATION
(see the instructions supplied with the cooktop).
Turn the control knob of the relevant hotplate
clockwise to the desired power setting.
The oven control panel features 4 adjustable knobs
for cooktop operation. The cooktop control knobs
are marked with a numerical scale corresponding
to different power settings, and a series of function
and 0.00
symbols.
GENTLE HEAT
To allow dough to rise, to soften butter taken
from the fridge, to keep baby bottles or food warm,
also for making yoghurt, melting chocolate, etc.
This function is only available when the residual
heat indicator is on. For this function, make sure the
residual heat indicator of the desired hotplate is on.
Turn the knob to
the position of the knob.
HEAT MAINTENANCE
To maintain a constant temperature of 60° until
the end of cooking. To select this function, turn the
knob to
FAST BOIL
This function is used to bring water to the
boil rapidly and remains on for a preset time. At the
end of the preset time, the cooktop automatically
returns to the maximum power setting. This function
can be selected even during cooking. Important:
before selecting this function, make sure the pot
is positioned on the selected hotplate in order
to avoid any damage to the cooktop surface. The
stated performance values for this function are those
guaranteed for all glass ceramic cooktops. For this
function, place the pot on the selected hotplate and
turn the knob to
of the knob.

MULTIZONE

This is available on the front left and rear
left hotplates. This extends the heating area of the
cooktop in order to allow the use of large, oval or
rectangular pots or cooking receptacles. To select
this function: turn the knob to
the residual heat indicator for the hotplate begins
to flash. To switch on the triple zone function (if
available), wait until the LED begins flashing quickly.
Select the power setting required by turning the knob
anticlockwise. The residual heat indicator remains on
to indicate that the cooktop is in use. To deselect, turn
the knob to
Please note: The multizone function can only be switched on
for the double and triple hotplates of the cooktop.
. To deselect the function, change
.
. To deselect, change the position
and wait until
by turning the knob anticlockwise.