All manuals and user guides at all-guides.com
using the cooktop
the clock symbol lights up beside the cooking zone display, then set the desired
time using the timer [+] and [-] keys within 5 seconds. Wait for 5 seconds for the
automatic confirmation. The time countdown will be start on the timer display.
When time elapses the cooking zone will automatically switch off, the timer
display will show a flashing «000» and an acoustic signal will be heard. Press the
[+] or [-] key on the timer area to stop the signals.
To disable the timer of a cooking zone press repeatedly and simoultaneously
the [+] and [-] keys on the timer area until the clock symbol lights up beside
the display of the desired cooking zone, press again the timer [+] and [-] keys
simoultaneously, then bring the timer value back to «000» by using the timer [-]
key. Wait for 5 seconds for the automatic confirmation.The clock symbol beside
the cooking zone display goes off.
Egg timer/reminder
When no cooking zone is active it is possible to set an acoustic reminder which
stays active after switching the appliance off. When the Egg timer/Reminder
function is active, the Timer function cannot be selected.
To enable this function press simoultaneously the timer [+] and [-] keys. The
clock symbol lights up below the timer display. Set the time, ranging from «1.00»
(1 minute) to «1.59» (1 hour and 59 minutes), by pressing the [+] and [-] keys.
Wait for 5 seconds for the automatic confirmation. The time countdown will be
shown on the timer display.
When time elapses the display will show a flashing «000» and an acoustic signal
will be heard. Press the [+] or [-] key on the timer area to stop the signals.
To disable the Egg timer/Reminder function press simoultaneously the timer [+]
and [-] keys. The clock symbol lights up below the timer display. Bring the timer
value back to «000» by using the [-] key. Wait for 5 seconds for the automatic
confirmation.The clock symbol beside the timer display goes off.
Pause
When at least one cooking zone is operating it is possible to momentaneously
pause the appliance switching off the cooking zones.
To enable this function press the Pause/recall key. The relative led lights up
and all the cooking zone displays show the symbol «II» . Previously programmed
timers will be stopped.
The pause can last for maximum 10 minutes. If this status is not terminated
within this time the appliance switches off.
To disable the Pause function press the Pause/recall key and slide right on the
flashing slidebar within 10 seconds.
Recall
When the appliance has been switched off by mistake it is possible to quickly
recall the previously active settings by pressing the Power key within 5
11