Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
using the cooktop
the Programs key twice. The Melt led lights up besides the cooking zone
display.
• Simmer
The ''Simmer'' program sets the heat temperature of the selected cooking
zone at 94°C to bring to a boil slowly preparing sauces or soups and stews.
To activate this program press three times the Programs key, the Simmer
led lights up besides the cooking zone display.
• Power Boost
This program further reduces the cooking time of a certain cooking zone, by
bringing the temperature to the maximum heat level for 10 minutes.
At the end of this timeframe, the cooking zone heat level will automatically go
back to level «9». The use of this function is recommended for heating large
quantities of liquids (e.g. water to cook pasta) or food in a very short time.
To activate this program slide right on the slidebar until the «P» symbol appears
on the cooking zone display.
• Automatic warm-up
All cooking zones are equipped with an "automatic warm up" function. This
feature sets the cooking zone to the highest heat level for a certain period of
time and then automatically switches back to the cooking setting that was
originally set.
The lenght of time that the automatic warm up function operates depends on
the heat setting selected.
To activate the "automatic warm up" function on a cooking zone place your
finger on the slidebar at the desired heat level an hold the position until the
symbol «A», alternating with the selected heat level, appears on the cooking
area display.
Safety switch
The appliance has a safety switch that
automatically switches off the cooking
zones when they have been operating
for a certain amount of time at a given
heat level. In case of hot surface the
residual heat symbol «H» is displayed.
HEAT LEVEL
OPERATING
TIME LIMIT (hours)
1 - 2
6
3 - 4
5
5
4
6 - 7 - 8 - 9
1,5
13
Publicidad
