Hansgrohe AXOR Starck 10401 Serie Montaje página 6

Assembly
1. Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
10401XXX / 10402000: The flow is changed from
bath to shower function by pulling the diverter knob.
After shutting off the water flow, the mixer returns
automatically to the bath function.
Technical Data
Operating pressure:
Recommended operating pressure: 0.1 - 0.5 MPa
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Centre distance:
Connections G ½":
Rate of flow 0.3 MPa:
Test certificate
10402XXX/10601XXX:
Anti-pollution function
Fault
Insufficient water
Mixer stiff
Mixer dripping
Hot water temperature too low
Instantaneous heater didn't work - Flow limiter in handshower isn't
6
English
To adjust the hot water limiter on single lever mixers,
please see page 13.
No adjustment is necessary when using a continuous
flow water heater.
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0.15 MPa.
Spare parts (see page 3)
1
1.1 screw cover
2
3
4
5
6
7
8
max. 1 MPa
9
10 non return valve
1.6 MPa
11 noise reduction
max. 80° C
12 hose
65° C
13 filter packing (25)
150 ± 16 mm
14 handshower
cold right -
15 spray former cpl.
hot left
approx. 22 l/min
XXX = Colors
WRAS
000 chrome plated
810 satinox
Cause
- Shower filter seal dirty
- Non return valve hasn't moved
back
- Cartridge defective, calcified
- Cartridge defective
- Hot water limiter incorrectly set - Set hot water limiter
removed
- Filter are dirty
- Non return valve hasn't moved
back
handle
flange
nut
cartridge cpl.
flange
ball S - unions
aerator cpl. (10)
selector assy
diverter knob
Remedy
- Clean filter seal between shower
and hose
- Exchange non return valves
- Exchange cartridge
- Exchange cartridge
- Remove flow limiter
- Clean the filter / exchange filter
- Exchange non return valves
10490XXX
96338000
96395XXX
96461000
92730000
96467XXX
94140000
13485000
94077000
96466XXX
94074000
96429000
28282XXX
94246000
28531XXX
97467000