Maintenance And Storage - Flo 79734 Manual De Instrucciones

EN
ator. Always ensure that both hands are in the working position (work position) before turning
the machine back onto the ground.
Do not transport the machine when its supplied with power.
Keep hands and feet away from rotating parts. Stay clear of the ejection opening at all times.
Stop the machine and pull the plug from the socket. Make sure that all moving parts have
come to a complete stop:
- every time you step away from the machine;
- before removing a blockage or unlocking the steering element,
- before checking, cleaning the machine or working with the machine,
- after hitting a foreign object. Visually inspect the machine for damage and repair it before
restarting and operating the machine;
if the machine starts to vibrate excessively (check immediately):
- perform a visual inspection for damage,
- replace or repair all damaged parts,
- check for loose parts; if there are some, tighten them.

Maintenance and storage

Make sure that all nuts, bolts and screws are tightened to make sure that the equipment is in
a safe working condition.
Check the catcher frequently for wear or damage.
Replace worn or damaged parts to ensure safety.
In the case of machines with multiple tile assemblies, note that rotation of one tile assembly
may cause rotation of another tile assembly.
Be careful when adjusting the machine to prevent fi nger entrapment between the moving tile
assemblies and the fi xed parts of the machine.
Always allow the machine to cool down before storage.
When maintaining the tine assembly, be aware that while the power source is disconnected,
the tile assemblies may still move.
Replace worn or damaged parts to ensure safety. Use only original spare parts and equip-
ment.
When the machine is stopped for maintenance, visual inspection or storage, or accessory
replacement, turn off the power source, disconnect the machine from the power supply, and
make sure that all moving parts have come to a complete stop. Allow the machine to cool
down before carrying out any visual inspection, adjustments, etc. Maintain the machine care-
fully and keep it clean.
Store the machine in a place inaccessible for children.
Recommendations
It is recommended that the machine be power-supplied by a residual current device (RCO)
with a trip current of 30 mA or less.
Risks related to noise and vibrations
The tool is designed to reduce the risk of exposing the user to noise and vibration as much
O R I G I N A L I N S T R U C T I O N S
16