Initial Use; Assembling The Light; Switching The Light On / Off; Dimming The Bulb - LIVARNO LUX 285632 Instrucciones De Utilización Y De Seguridad

Initial use / Replacing the bulb / Maintenance and Cleaning / Disposal

Initial Use

Assembling the light

Caution: The lamp glass
are pre-assembled, but are not screwed
1
tight.
Bring the lamp glass
Screw the lamp glass
sure they are positioned correctly.
Use a clean, lint-free, dry cloth to insert the
bulb .
5
Screw the illuminant
lamp socket (see Fig. B).
3
Plug the mains plug
stalled socket.
Your light is now ready to use.

Switching the light on / off

Press the ON / OFF in-line switch
the light on and off.

Dimming the bulb

The light is only dimmable using the bulb
supplied. To dim the bulb
the light on and off multiple times in short suc-
cession using the ON / OFF in-line switch

Replacing the bulb

RISK OF ELECTRIC SHOCK!
First unplug the mains plug
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES! Allow the lamp to cool down
completely.
Use a clean, lint-free, dry cloth when replacing
the illuminant .
5
Unscrew the defective illuminant
lamp socket , turning counter-clockwise.
3
Screw a new illuminant, clockwise into the
lamp socket .
3
14 GB/IE
and the ring nut
2
into the correct position.
2
to the ring nut . Be
2 1
clockwise into the
5
into a properly in-
4
to switch
7
5
in the light, switch
5
7
from the socket.
4
from the
5
Plug the mains plug
stalled socket.
Your light is now ready to use.

Maintenance and Cleaning

First remove the mains plug
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES! Allow the lamp to cool down
completely.
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Plug the mains plug
stalled socket.

Disposal

The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Observe the marking of the packaging
. materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
into a properly in-
4
RISK OF ELECTRIC SHOCK!
from the socket.
4
RISK OF ELECTRIC SHOCK!
into a properly in-
4