To Recharge The Battery - Dogtra Europe YS300 Manual De Instrucciones

TO RECHARGE THE BATTERY

1. Open the Battery Charging Receptacle & Rubber
Plug on the Anti-Bark Collar and connect the Lithium
Polymer Charger to the battery-charging receptacle as
shown in the diagram.
2. Plug the Lithium Polymer Charger into an electrical
power outlet of ordinary household voltage (220V).
3. Li-Polymer Battery provides a 2-hour rapid charge.
4. When the battery is recharging, the LED will stay on
red. The LED light will become green when the battery
is completely recharged (The battery is fully charged
with a 2-3 hours charge.).
36
220V / 5V 1A
Charger
Wall Outlet
Battery
On Charging
life
charging
Indicator Light
Stays on red
(LED Window)
IMPORTANT
Only use the Dogtra approved Lithium Polymer
Battery Charger that is designed for the YS300. The
use of the wrong charger can damage the unit.
Charger Info
Manufacturer : E-SUN
Manufacturing country : CHINA
Model name : MKC-0501000SEU
INPUT : 100-240V~50/60Hz 0.4A
OUTPUT : 5V 1000mA 5.0W
WARNING
During battery charging, the unit must be close to
the wall outlet and the wall outlet must be easily
accessible for security reasons.
Completely recharged
Stays on green
37