Filling Clean Water Tank
Press the Clean Water Tank release button
to remove it from the appliance.
Place the tank back into the appliance. You
should hear a "Click" if done correctly.
Charging Instructions
Warning:
• Only charge the appliance with the adaptor supplied by Tineco.
• During long periods of not being used, the appliance must be charged once every 3 months for
optimal performance. It may take 4-5 hours for a full charge.
• Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures.
Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).
②
①
Open the tank cap, and fill with tap water to the
Max line. When deep cleaning is necessary, add one
bottle cap of solution to the CWT and tightly close
the cap.
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
To charge the appliance, place the appliance on the
charging base and plug the adaptor into a power
outlet.
1. To charge the appliance, connect the external
charging cord to the charging base and plug it into
the wall outlet.
2. To avoid tripping hazards, please place the
appliance on the charging base near a wall during
charging.
12
MAX