Connections - Truper MOE-2A Manual

• For belt and chain drive applications, verify that the
centers of the drive and driven pulleys and/or sprockets
are aligned with each other as shown.
• Proper alignment and mounting will reduce motor
noise and workload vibration.
CAUTION • To perform the wiring, make sure
that the lines are not energized.
• Remove the rear cover (A) to access the connection
panel.
• Make the connections according to the voltage
configuration that best suits your needs.
Voltage configuration
115 Volts
Red
Blue
Orange
Black
White
Yellow
Direction of rotation configuration
• When using any of the configurations shown above,
the motor shaft rotates clockwise as viewed from the
connection panel. To reverse counterclockwise rotation:
interchange the red and black wires.
8
ENGLISH
Ground
1
Line 1
2
3
Line 2
4
Mounting

Connections

A
230 Volts
Red
Blue
2
Orange
Black
3
White
Yellow
Ground
1
Line 1
Line 2
4