Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
TROUBLESHOOTING
Problem
The motor does
not start when
you pull the
trigger switch.
The machine
smokes during
operation.
blades do not
move.
There is too
much
noise and/or
vibration
during opera
tion.
20
Cause
The battery is not
installed tightly.
The battery is out of
power.
The front handle
operator presence
switch is not engaged.
The machine has
damage.
The machine has
damage.
The blades are
blocked.
The parts are loosen. 1. Stop the machine.
The parts have
damage.
Solution
Make sure that you tighlty
install the battery in the ma
chine.
Charge the battery.
Engage the front handle
operator presence switch.
1. Immediately stop the
machine.
2. Remove the battery.
3. Contact your dealer.
Do not use the machine and
contact your dealer.
Remove battery then clear
blockage from the blades.
2. Remove the battery.
3. Inspect for damage.
4. Check and tighten loose
parts.
Do not use the machine and
contact your dealer.
© 08/2021 ECHO Incorporated
DHC-2300
99922205732
Publicidad
