Publicidad
Idiomas disponibles
Idiomas disponibles
Step 7. Remove one of three switch housing
screws on the switch housing and keep for later
use, then loosen the other two.
7.
Switch housing
screw
Figure 15
Figure 16
Step 8. Connect the 2 single pin connectors from
the light kit to the 2 single pin connectors from the
motor assembly. Attach the light kit to switch
housing using the two key slots in the light kit.
Replace the screw previously removed on step 7.
Tighten all switch housing screws securely.
LED light kit
Shade
Step 9. Secure the shade to switch housing by
twisting in a clockwise direction. Do not over-tighten.
Figure 17
Publicidad
