TOPDON BT600 Manual Del Usuario página 26

Q: What batteries can the BT600 work on?
A: It works on 12V regular flooded, AGM Flat plate, AGM Spiral,
GEL and Deep Cycle batteries, with CCA between 100 to 2000.
Q: Is the BT600 designed with any built-in protections?
A: Yes. It offers peace of mind with extra-safe Reverse Polarity
and Spark protection. It offers easy operations even if you're
new to battery testing.
Q: How do I confirm if my vehicle battery is bad or good?
A: The battery tester will display SOH (State of Health), SOC (State
of Charge), CCA (Cold Cranking Ampere), Voltage, Internal
Resistance, and Rating, with an intuitive test result of "GOOD"
or "BAD" for your reference. If the internal resistance is too
large, it indicates a broken battery.
Q: Can this battery tester estimate the remaining capacity of my
battery?
A: Yes. The battery tester will display SOC (State of Charge) to
express as a percentage of your battery's rated capacity, a
measure of its condition to assess the potential energy.
Note that a decent SOC (State of Charge) doesn't mean the
battery is in good condition. Be sure to refer to your battery's
actual CCA Value and Internal Resistance for further analysis.
SECTION 11
TECHNICAL SPECIFICATION
Working Temperature
Storage Temperature
Operating Voltage
Dimensions
EN I 26
-10°C~55°C (14°F~131°F)
-20°C~75°C (-4°F~167°F)
DC 9~30V
218 x 134 x 57mm (8.58 x 5.27
x 2.24")