Slide the metal brackets into the sides of
5
the rails.
E n g l i s h
Now you can attach the rails to the other
6
side of the metal bracket.
Screw the metal bracket to the frame.
7
Now push the drawbars into the
8
respective tracks located on the sides of
the screen material, and distribute the screen
material evenly and over the entire area,
avoiding wrinkles.
18
Place the screen material onto the pre-
9
assembled frame. Since the position of
the screen material cannot be corrected after
assembly, please ensure at this stage that the
screen material is distributed exactly uniformly
over all of the surfaces and not is not gathered
up at the corners.
Next, place the eyelets in the canvas
10
screen over the mounting support. Start
on one side and work in a clockwise manner.
Once you have the completely stretched
11
out the screen material, please check to
ensure that the screen is completely wrinkle-
free. If not, stretch out the screen again and
distribute the material evenly over the entire
surface until it is completely taut and wrinkle-
free.