JULIUS MAYER JM35-F Manual De Instrucciones página 24

Technical data
Output Output
Motor type
torque speed
JM35-100F 10 Nm 17 min
JM45-150F 15 Nm 15 min
JM45-250F 25 Nm 15 min
JM45-350F 35 Nm 15 min
Scope of delivery
Compare after unpacking:
the package contents with the information on the scope of delivery in these instructions.
the motor type with the corresponding information on the nameplate.
The type designation can be found on the packaging.
For technical data, see table.
If necessary, incomplete devices or devices that do not comply with the
specifications must not be put into operation and a complaint must
be lodged with our customer service (see contact information) before the motor is installed!
1 Motor
2 Adapter and driver (pre-assembled)
SW 40 (JM35F) / SW 60 (JM45F)
Motor click bearing and motor head plate
3
with screws (JM35 only)
4 Motor star bearing with cotter pin
5 Motor flat bearing with split pin (JM45 only)
6 Adjustment pin
Instruction manual
7
24
Mains - Mains - Straw
Voltage Frequency intake
230 V 50 Hz 0,53 A
1
230 V 50 Hz 0,64 A
1
230 V 50 Hz 0,83 A
1
230 V 50 Hz 0,86 A
1
TECHNICAL DATA / SCOPE OF DELIVERY
Switch-on Protection
Engine power
duration class
121 Watt 4 min. IP 44
145 Watt 4 min. IP 44
191 Watt 4 min. IP 44
198 Watt 4 min. IP 44
1
2
3
Jacket pipe- Emission sound
diameter pressure level
35 mm ≤ 70 dB (A)
45 mm ≤ 70 dB (A)
45 mm ≤ 70 dB (A)
45 mm ≤ 70 dB (A)
4
5
7
Julius Mayer Rohrmotor
Baureihe JM35-F / JM45-F
mit mechanischen Endschaltern und integriertem Funkempfänger
Gültig für folgende Modelle:
Für Wellengrößen ab 40mm: JM35 - 100F
Für Wellengrößen ab 60mm: JM45 - 150F | JM45 - 250F | JM45 - 350F
DE Original Montage- und Bedienungsanleitung
Radio -
Frequency
433,05 - 434,79
MHz
433,05 - 434,79
MHz
433,05 - 434,79
MHz
433,05 - 434,79
MHz
6
JM_Funk-Rollladenmotor_JM35-F_JM45-F_V_2022-07-15