Publicidad
Idiomas disponibles
Idiomas disponibles
8.
With the board still on saw horses or a support table.
Attach left and right pad sections to board using screws and washers as shown.
Using the holes which line up for your board size, attach center pad section to left and right
sections and board using screws and washers as shown.
• It may be necessary to use an 11/64 drill bit (6) to pre-drill on some backboards (Figure A). A center
punch is recommended to mark hole locations prior to drilling to keep drill bit from wandering.
66
67
A.
49
Install Board Pads to Backboard
62
25
64
66
65
66
67
64
62
66
67
63
66
66
67
65
63
Publicidad
