Use - Chauvin Arnoux MR6292 Manual De Instrucciones

„ Connect the clamp to the C.A 6292; the ON indicator lights.
„ Press the trigger of the clamp to open the jaws.
„ Then clamp the cable to be measured. Insofar as possible, the cable should be centred in the jaws
of the clamp.
„ Release the trigger.
„ After making the measurement, remove the clamp from the conductor, then disconnect it by pressing
on the locking lever of the XLR connector,
For the measurement configuration and technical characteristics, refer to the operating instructions
of the C.A 6292.

2. USE

Rx
I
14
C.A 6292
MICRO-OHMMETER